CETSEAL ADHESIVE 10.1 OZ
CETSEAL is a multi-purpose, single component polyether moisture cure sealant/adhesive. Setseal is a low VOC, 100% solids, non-shrinking product with excellent UV resistance. Size: 10.1 oz Cartridge.
- Multi-purpose, single component polyether moisture cure sealant/adhesive.
- CETSEAL is a low VOC
- 100% solids
- Excellent UV resistance
The primary applications are:
- Grade termination sealant
- Membrane lap sealant
- Waterstop adhesive
- Grade Termination Sealant: Apply a continuous bead of CETSEAL between concrete wall and top of the membrane; apply continuous bead of CETSEAL where termination bar fasteners will be installed. Install termination bar flush to the top of the membrane then apply a continuous bead of CETSEAL along the top of the termination bar covering and sealing the concrete to complete the termintation.
- Waterstop Adhesive: Apply a continuous bead of CETSEAL to substrate and/or waterstop then install waterstop before CETSEAL skins over. Yield will vary with use, substrate and application. Typical yield at 1/4” (6 mm) diameter bead:10.1 oz cartridge - 20 linear feet (6 m)
Remove all dirt and debris, surface coatings and sealers before application. Prepare metal by removing rust, scale and oil residue. Allow treated lumber to cure for six months prior to application. Do not apply in standing water conditions or at temperature below 25oF (-4oC)