16 Canadian Locations Find one
Our Edmonton Location Has Moved

Crack-Stix Black Small Permanent Asphalt Crack Filler 1/4" 2 Gallon Pail (250 ft. , 76 M)

Dalton Enterprises, Inc.
#2060

Crack-Stix® SMALL 1/4″ Black Permanent Asphalt Crack Filler is the only PERMANENT solution to cracks on the marketplace…and is now offered in a thinner “SMALL” version that is 1/4″ in diameter. It is the same product seen on highways and roads but the only difference is YOU CAN APPLY IT and don’t need a 200 gallon melter to do it!

Crack-Stix® in the SMALL version is furnished as a black solid “rope” in 1/4″ thickness. It is an elastomeric, self-leveling sealant, which liquefies quickly and can be used in both asphalt and concrete pavements. When properly applied, it combines tenacious adhesive power with extraordinary resiliency to protect against the infiltration of moisture or incompressibles through repeated thermal cycles of expansion and contraction.

Crack-Stix® exhibit superior low temperature ductility, weather resistance, low oxidation breakdown and is non-tracking. It is the only sealant available which is designed to be inserted into the crack or joint cavity first and then melted with direct heat process. The modifier system contained in Crack-Stix® allows the material to withstand direct heat without experiencing degradation.

(Note: Pli-Stix and Crack-Stix® are the same product offered in black or gray:

Pli-Stix comes in 30ft MEDIUM 1/2″ or 60ft SMALL 1/4″
Crack-Stix® comes in longer rolls: 75ft MEDIUM 1/2″, 125ft MEDIUM 1/2″ AND 250ft SMALL 1/4″)

• No VOC’s

• Prevent slip, trip and fall accidents

• Ready to use immediately, melt-away wrapper!

• Save time and purchase either our CSX-900 Cane Torch extender our really speed up application with our NEW walk behind CSX-1000 PRO MELT TORCH!

TIP: If you are not using our recommended torch and are using just a handheld torch it can be difficult to keep the torch upright (or it may flame out)…so you may want to find BURNER WAND which will keep the flame running!

For deep cracks or joints, before you begin fill the crack using backer rod, sand or stone dust but leave enough room for product.

Keep up to date with NCA!

Not Finding What You're Looking For?
Try browsing our catalogues

BROWSE OUR CATALOGUE